AETM/AET Nanofabrication Manufacturing Technology Degree Requirements
Prospective Students
We want to make sure you have all of the information that you'll need to make a good decision about the programs offered in our department. Please select the link above to visit our Information Request page. We'll work hard to answer your questions!
AETM Nanofabrications Manufacturing Technology - 4-year Degree (B.S.) Requirements
The Applied Engineering & Technology Management degree is a four-year program where upon successful completion you will be awarded a bachelor's degree. Your coursework over the four years in the program will be divided into three categories: 1) General Education; 2) Technical Option Classes; and 3) Management.
General Education: 51 credits (minimum)
All students seeking a bachelor's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Nanofabrication Manufacturing Technology Technical Core: 39 credits
The required courses for the Nanofabrication Manufacturing Technology degree are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78. Since this option is offered in collaboration with Penn State University, their courses (identified as NMFT) can be viewed at http://www.nano4me.org/PaNMT/programs.html.
Bachelor's Degree
|
|
| ITEC 110: Communication and Information Systems | |
| ITEC 120: Energy, Power, and Transportation Systems | |
| ITEC 130: Production Materials and Processes | |
| ITEC 241: Drafting Communications |
|
| ITEC 261: Electronic Systems |
|
| ITEC 262: Semiconductor Electronics |
|
| CHEM 302: Chemistry in Nanotechnology |
|
| Capstone courses offered at Penn State University/State College, PA |
|
| NFMT 311: Materials, Safety & Equipment Overview for Nanofab |
|
| NFMT 312: Basic Nanofabrication Processes |
|
| NFMT 313: Thin Films in Nanofabrication |
|
| NFMT 314: Advanced Lithography and Patterning Techniques |
|
| NFMT 315: Materials Modification in Nanofabrication |
|
| NFMT 316: Characterization, Packaging & Testing of Nanofab Structures |
Management Core: 21 credits
Management coursework makes up a large part of your degree requirements. There are five courses that are required for all AETM majors regardless of the option you choose. In addition to the required management core, you will also take three management courses that you and your advisor will agree on for your program of study.
AET Nanofabrication Manufacturing Technology - 2-year Degree (A.T.) Requirements
The Applied Engineering & Technology degree is a two-year program where upon successful completion you will be awarded an associate's degree. Your coursework over the two years in the program will be divided into two categories: 1) General Education; and 2) Technical Option Classes.
General Education: 31-32 credits (minumum)
All students seeking an associate's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Nanofabrication Manufacturing Technology Technical Core: 33 credits
The courses for the Nanofabrication Manufacturing Technology associate's degree are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78. Since this option is offered in collaboration with Penn State University, their courses (identified as NMFT) can be viewed at http://www.nano4me.org/PaNMT/programs.html.
Associate's Degree
|
|
| ITEC 110: Communication and Information Systems |
|
| ITEC 120: Energy, Power & Transportation |
|
| ITEC 130: Production Materials and Processes |
|
| OSEH 120: Safety, Health, and Environmental Issues |
|
| ITEC 261: Electronic Systems |
|
| Capstone courses offered at Penn State University/State College, PA |
|
| NFMT 311: Materials, Safety & Equipment Overview for Nanofab |
|
| NFMT 312: Basic Nanofabrication Processes |
|
| NFMT 313: Thin Films in Nanofabrication |
|
| NFMT 314: Advanced Lithography and Patterning Techniques |
|
| NFMT 315: Materials Modification in Nanofabrication |
|
| NFMT 316: Characterization, Packaging & Testing of Nanofab Structures |
