Electronics/Control Systems Technology Degree Requirements
Prospective Students
We want to make sure you have all of the information that you'll need to make a good decision about the programs offered in our department. Please select the link above to visit our Information Request page. We'll work hard to answer your questions!
AETM Electronics/Control Systems Technology - 4-year Degree (B.S.) Requirements
The Applied Engineering & Technology Management degree is a four-year program where upon successful completion you will be awarded a bachelor's degree. Your coursework over the four years in the program will be divided into three categories: 1) General Education; 2) Technical Option Classes; and 3) Management.
General Education: 51 credits (minimum)
All students seeking a bachelor's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Electronics/Control Systems Technical Core: 36 credits
The Electronics/Control Systems Technology option is divided into two specializations: Electronics and Conrol. The courses are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78.
Bachelor's Degree
|
|
| ITEC 110: Communication and Information Systems | |
| ITEC 120: Energy, Power, and Transportation Systems | |
| ITEC 130: Production Materials and Processes | |
| ITEC 261: Electronic Systems |
|
| ITEC 262: Semiconductor Electronics |
|
| ITEC 325: Power Conversion and Control |
|
| ITEC 364: Digital Electronics |
|
| ITEC 467: Microprocessor Electronics |
|
Bachelor's Degree Specializations: 12 credits
Select four courses for each specialization from the list below. |
|
Electronics Specialization
|
Control Specialization
|
| ITEC 363: Analog Electronics |
ITEC 326: Fluid Power |
| ITEC 465: Instrumentation and Control |
ITEC 425: Robotic Systems |
| ITEC 466: Electronic Communication Systems |
ITEC 427: Designing Industrial Control Systems |
| ITEC XXX: select one from ITEC 241, ITEC 281, ITEC 326, ITEC 425, ITEC 427, ITEC 486, or ITEC 498. |
ITEC XXX: select one from ITEC 241, ITEC 281, ITEC 363, ITEC 465, ITEC 466, ITEC 486, or ITEC 498. |
Management Core: 24 credits
Management coursework makes up a large part of your degree requirements. There are five courses that are required for all AETM majors regardless of the option you choose. In addition to the required management core, you will also take three management courses that you and your advisor will agree on for your program of study.
AET Electronics/Control Systems - 2-year Degree (A.T.) Requirements
The Applied Engineering & Technology degree is a two-year program where upon successful completion you will be awarded an associate's degree. Your coursework over the two years in the program will be divided into two categories: 1) General Education; and 2) Technical Option Classes.
General Education: 31-32 credits (minimum)
All students seeking an associate's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Electronics/Control Systems Technical Core: 33-34 credits
The Computer-Aided Drafting & Design option is divided into two specializations: Product Design & Architectural Design. The courses are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78.
Associate's Degree
|
|
| ITEC 110: Communication and Information Systems | |
| ITEC 120: Energy, Power, and Transportation Systems | |
| ITEC 130: Production Materials and Processes | |
| OSEH 120: Safety, Health, and Environmental Issues |
|
| ITEC 261: Electronic Systems | |
| ITEC 262: Semiconductor Electronics | |
| ITEC 325: Power Conversion and Control | |
| ITEC 364: Digital Electronics | |
| ITEC 467: Microprocessor Electronics | |
Asspciate's Degree Specializations: 6 credits
Select two courses for each specialization from the list below. |
|
Electronics Specialization
|
Control Specialization
|
| ITEC 363: Analog Electronics |
ITEC 326: Fluid Power |
| ITEC 465: Instrumentation and Control |
ITEC 425: Robotic Systems |
| ITEC 466: Electronic Communication Systems |
ITEC 427: Designing Industrial Control Systems |
| ITEC XXX: select one from ITEC 241, ITEC 281, ITEC 326, ITEC 425, ITEC 427, ITEC 486, or ITEC 498. |
ITEC XXX: select one from ITEC 241, ITEC 281, ITEC 363, ITEC 465, ITEC 466, ITEC 486, or ITEC 498. |
