AETM/AET Manufacturing Technology Degree Requirements
Prospective Students
We want to make sure you have all of the information that you'll need to make a good decision about the programs offered in our department. Please select the link above to visit our Information Request page. We'll work hard to answer your questions!
AETM Manufacturing Technology - 4-year Degree (B.S.) Requirements
The Applied Engineering & Technology Management degree is a four-year program where upon successful completion you will be awarded a bachelor's degree. Your coursework over the four years in the program will be divided into three categories: 1) General Education; 2) Technical Option Classes; and 3) Management.
General Education: 51 credits (minimum)
All students seeking a bachelor's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Manufacturing Technology Technical Core: 36 credits
The required courses for the Manufacturing Technology degree are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78.
Bachelor's Degree
|
|
| ITEC 110: Communication and Information Systems | |
| ITEC 120: Energy, Power, and Transportation Systems | |
| ITEC 130: Production Materials and Processes | |
| ITEC 241: Drafting Communications |
|
| ITEC 271: Processing Nonmetallic Materials |
|
| ITEC 281: Processing Nonmetallic Materials |
|
| ITEC 382: Computer Numerical Control Machining |
|
| Select two of the following three courses: |
|
| ITEC 375: Polymer and Ceramic Technology |
|
| ITEC 376: Wood Technology |
|
| ITEC 483: Computer-Aided Manufacturing |
|
| Select two of the following five courses: | |
| ITEC 325: Power Conversion and Control |
|
| ITEC 336: Characteristics and Testing of Production Materials |
|
| ITEC 425: Robotic Systems |
|
| ITEC 445: Design for Manufacture and Assembly |
|
| ITEC 448: Machine Tool Design |
|
| Select one of the following two courses: | |
| ITEC 476: Wood Manufacturing Processes |
|
| ITEC 485: Advanced Manufacturing Systems |
Management Core: 24 credits
Management coursework makes up a large part of your degree requirements. There are five courses that are required for all AETM majors regardless of the option you choose. In addition to the required management core, you will also take three management courses that you and your advisor will agree on for your program of study.
AET Manufacturing Technology - 2-year Degree (A.T.) Requirements
The Applied Engineering & Technology degree is a two-year program where upon successful completion you will be awarded an associate's degree. Your coursework over the two years in the program will be divided into two categories: 1) General Education; and 2) Technical Option Classes.
General Education: 31-32 credits (minumum)
All students seeking an associate's degree from Millersville University must successfully complete the general education requirements. The general education requirements are designed to help make you into a well-rounded professional. Please take some time to ready about the general education requirements in the Undergraduate Catalog. An explanation of the program is located on page 37 of the Catalog at http://www.millersville.edu/~ucatalog/index.pdf.
Manufacturing Technology Technical Core: 33 credits
The courses for the Manufacturing Technology associate's degree are listed below and you can read their descriptions in the Undergraduate Catalog. The AEST information starts on page 78.
Associate's Degree
|
|
| ITEC 110: Communication and Information Systems |
|
| ITEC 120: Energy, Power & Transportation |
|
| ITEC 130: Production Materials and Processes |
|
| OSEH 120: Safety, Health, and Environmental Issues |
|
| ITEC 241: Drafting Communications |
|
| ITEC 271: Processing Nonmetallic Materials |
|
| ITEC 281: Processing Metallic Materials |
|
| ITEC 342: Computer-Aided Engineering Drawing |
|
| ITEC 382: Computer Numerical Control Machining |
|
Associate's Degree Elective Courses: 6 creditsSelect two courses from the following list. |
|
| ITEC 300: Internship |
|
| ITEC 325: Power Conversion and Control |
|
| ITEC 336: Characteristics and Testing of Production Materials |
|
| ITEC 375: Polymer and Ceramics Technology |
|
| ITEC 376: Wood Technology |
|
| ITEC 425: Robotic Systems |
|
| ITEC 445: Design for Manufacture and Assembly |
|
| ITEC 448: Machine Tool Design |
|
| ITEC 483: Computer-Aided Manuffacturing |
|
| ITEC 485: Advanced Manufacturing Systems |
